VOC MONITOR (MODEL : ATS -103M) VOLATILE ORGANIC COMPOUNDS (VOC) DETECTION ANALYSIS & MONITORING (CARBON DISULFIDE, CHLORO BENZENE, HYDRAZINE, METHYL BROMIDE, ISOBUTANE, TETRACHLOROETHYLENE, manufacturing in mumbai, manufacturing in india. The ATS 103M provides the ultimate flexibility in portable detection of volatile organic compounds (VOCs). It utilizes solid state or plug-in detector containing 10.6 eV lamp to monitor potentially hazardous compounds like Methyl Bromide, Carbon Disulfide, Hydrazine at levels as low as 10 parts per billion (PPB). Response factors can be embedded to tune the display reading to your particular target gas or your most commonly encountered hazardous gases. Standard features include backlit LCD display, Low / High, Visual / Audible Alarm Indicator & In-built Sampling Pump, AC Adaptor / Battery Charger. The internal pump makes th ATS-103M ideal for : 1) Confined Space Entry Testing 2) Leak Assessments 3) Arson Investigations 4) Hazardous Materials Response Monitoring. 5) Internal pump for remote sampling 6) Fast response 7) High sensitivity 8)Data logging 9) RS-232 Output T ATS 103M also offers simple auto calibration. Its available in two ranges 0 - 20PPM and High Range 0 - 2000 PPM . High ranges can be configured up to 5000 PPM. The monitor is based on a photo ionization detector (PID). The sample gas is exposed to an ultraviolet light from a lamp. The light emitted by the lamp ionizes the targeted gases in the sample so they can be detected by the instrument and reported as a concentration. Chemicals such as VOCs with an ionization potential <10.6 eV will be detected by photo ionization SPECIFICATION: Gases : VOC & other gases with Ionization Potential < 10.6eV Case : High Impact PC/ ABS Dimensions : 170 (W) X 100 (H) X 130(D)mm approximately Detector : Plug-in PID (Photo Ionization Detector) & Solid state Ionization Lamp Energy : 10.6 eV Standard (PID) Measuring Ranges : i) 0 - 20 PPM ii)0 - 2000 PPM Resolution : Minimum Detectable Quantity i)0.1 PPM (Isobutylene) for Range 1 ii) 0.1 PPM for Range 2 Power Source : Lithium Rechargeable Batteries Sample Flow Rate : 0.5 LPM Temperature Range : 14°F to 104°F (0°C to 50°C) typical Humidity Range : 0 to 90% RH (Non-Condensing) Response Time : < 20 seconds