COMBUSTIBLE / LPG/CNG HYDROGEN GAS LEAK DETECTOR Model: ATS-101M Manufacturing in mumbai, manufacturing in india. This light, Handheld combustible gas leak detector is the perfect tool locating leaks of combustible gases such as Compressed Natural Gas (CNG), Liqufied Petroleum Gas (LPG) Liqufied Natural Gas (LNG), Methane (Ch4), Hydrogen (H2). The Micro Controller Based, Digitally Indicating Leak Detector With Long Life Semiconductor Sensor Responds Instantaneously To Minutest Leak Of All Combustible Gases And Pinpoints The Source Of The Leak Or Verify The Work Just Completed Of Being Leak Free with Its Long, Flexible Gooseneck And Sensor Cap The Unit Can Be Used For Checking Leaks From Inaccessible Hard To Reach Locations. SPECIAL FEATURES: Digitally Indicates the Intensity of Leak Calibrated in PPM or Explosive limit range Simple to Operate Highly Sensitive detection circuitry Unaffected by ambient temperature and Humidity Pocket size light weight design Audible alarm / low battery warning buzzer Tough ABS Plastic housing SPECIFICATION: Model : ATS 101M - I with Indication ATS 101M - B Non Indicative Gas Detected : LNG, LPG, CH4 Flammable gas, H2 Leak Strength Indication: I - DIGITAL B - Three Level Visual Alarms Calibration : PPM or LEL % (To Customers specs) Resolution : PPM or 1%LEL Response Time : 2 - 3 seconds Sensor : Solid state semiconductor Housing : High Impact ABS Plastic Alarm indication : Audible and visual alarm (3 Levels) Calibration : Not required Gooseneck : 6 inch Long (other lengths optional) Warm-up time : About 10 sec Battery : 6 volt alkaline, Rechargeable batteries 1.5V (AA Alkaline) Battery Operating Time : About 4 hours Temperature : -10°C to 50°C Humidity : 15 to 95% RH Weight : 200 GM Dimension : 119(H) X 80(L) X 25(D)