Black Colour Portable Dew Point Monitor are designed to measures dew point, Moisture and temperature faster and accurately over a wide measurments range. It is highly optimized to measure the dew point, moisture and Temperature for dryers and compressed air/gases. Periodic monitoring of industrial Air sytems results in a reduced maintenance cost & down time caused bycondensate, the leading cause of corrosion in pneumatic systems. Air or Gas samples up to 12kg /cm2 pressure and temperature up to 75 deg C can be directly measured. For higher temperature applications. a Heat sink tubing can be used. The meter can also be connected to a vacuum pump forsampling from systems at low or atmospheric pressure. Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, it sensor mainfold with an orifice that means line pressure for true pressure dew point readings. Application: Dryer & Compressed Air Process drying & Laboratory Analysis Light bulb manufacturing Industrial gas manufacturing Heat treatment Petrochemical / Petroleum industry Specification: Principle : Capacitive Thin Film Polymer Dew Point range: -60 deg c to + 30 deg c (Standered), -80 deg c to +30 deg c (Optional) Accuracy: 0 deg c to + 30 deg c = +/-1 deg c Response time: 10 seconds for 63% step change Display: 128x64 Graphics LCD weight : 450 gm Additional features (Optional) Computer interface : RS-232 link for Data in ASCII Delimited Format, 9600 Baud, 8 Bits , 1 stop, 1 start, No Parity. Data Logger: 32 Kbyte , Non-Volatile Memory.