Products | Applied Techno Engineers Private Limited, India

Preview

This is your website preview.

Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.

Manufacturing test

Online Nitrogen Oxide (NO2) Gas Leak Detector ATS 105MModel ATS 105M single channel digital control modules are designed to supervise and display the satus of a single intergal or remote sensor Model ATS 109TD assembly. Model ATS 109TD is housed in a NEMA 4 x wall mount enclosure or Ex -proof enclosure. Model ATS 105M Single channel controllers interface with industry standred two or three wire 4-20mA sensor or other standred voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarms levels. The Graphics display can read the concentration. LEDs on the front panel provide indication of all three alarms.The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps. to provide direct alarm action, reducing the need for interposing relays . Local Alarm devices can be connected to the configurable on board alarms.The Fail safe supervisory provides a reliable indicaiton that the Monitor is fully operational. The

Online Nitrogen Oxide (NO2) Gas Leak D

INR 35500

Online Sulfur Dioxide Gas Leak Monitor - Model ATS 105MThe Monitor is a single Gas Multipurpose monitor that combines simplicity and high performance in a low cost,low maintenance package.The rugged NEMA 4X or 7x assembly is suitable for a variety of industrial , commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or oxygen in process Flue Gas or Ambient Air.Specification:Minium Resolution: 0.1 or 1 unit of the rangeIndication: Digital ContinuousMounting: wallSensor Technology: Appropriate to ApplicationDetection Method: Diffusion / Sample Draw PumpAccuracy: +/- 2%Linearity: +/- 2%Relative Humidity: 0-99 % Non-condensingResponse Time: ( 90% in 10 seconds)singal Output for Recorder: 0- IV,420 mA (Optional)Alarm Setting: High and very High Adjustable over full rangeAlarmCircuits: SPDT 5 AMP 220V ContactsControls: Zero , Span, Alarm setting

Online Sulfur Dioxide (SO2) Gas Leak D

INR 35500

Dew Point Meter Model ATS-303D Process Dew Point Analyzer Designed to Handle Rigorous Demands of Moisture and Dew Point Measurement in Compressed air & Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding and Critical Moisture Monitoring ApplicationsRange:- 80 Deg C to +30 Deg CApplication:•Natural Gas•Hydrocarbon Processing•Catalyst Protection•Heat Treating•Industrial Gases• Dryer & Compressed Air

Dew Point Meter

INR 98500

nline Digital Dew Point Merer - Model ATS 303DINSTANT AND DIRECT MEASUREMENT OF DEW POINT, MOISTURE (PPM), VAPOR PRESSURE, HUMIDITY AND TEMPERATUREA MICROPROCESSOR - BASED PRECISION INSTRUMENT TO HELP ENSURING OPTIMUM OPERATION OF DRYING EQUIPMENTApplication:Compressed Air, Industrial Process Control,Drying system,Protection systems, Glove box, Turbines,HVAC & Breathing air.Specification:Probe: Capacitive Thin film water vapor sensorParameters (Selectable) : Dew Point, Moisture, Humidity, Vapor Pressure, TemperatureRange: Dew Point : -60 + 30 deg C (Other ranges are optional)Moisture: 0-23000 PPMHumidity: 0-100%Vapor Pressure : 0-17.5mmHgTemp: 0-80 deg CAccuracy: +/-1 deg C to 30 deg C dew point, +/-2 deg C from -60 deg C to 0 deg CAnalog Output: 4-20mAResponse Time: 10 sec for 63% step changeHousing : High Impact Plastic

Digital Online Dew Point Meter

INR 105000

Digital Online Dew point Analyzer - Model ATS 303D.Ideal for precise monitoring of moisture or dew point in air or gas output from dryers system or in process. Continous monitoring of dew point results in reduced maintance costs and downtime caused by separated moisture, The main cause of corrosion in pneumatic systems. the analyzer usesa highly accurate capacitive integrated thin film water vapor sensor,and is an economic alternative to the chilled-mirror dew point type meters. It utilizes microprocessor based circuits to give a direct read out in dew point or other units and other units corresponding to sensor output based on psychometric equations. To achieve higher accuracies it uses temperature compensation over complete operational range.The insturment is contained in a high impact plastic housing.Application: Compressed air, Industrial process control,Drying system, Protection systems,Glove box, Turbines, HVAC & Breathing airSpecification:Application: Compressed Air/ Gas· Range: -60 to +30 Deg C· Moisture : 0-23000 PPM· Accuracy : 0-30 deg c +/-1%.-60 to 0 Deg C +/- 1.5%· Display : High quality Graphics LCD (128x 64)· Sampling : Direct Plug In· Power Supply : Rechargeable Ni-cad Battery Pack with Charger.· Response Time: 30 seconds at 95% variation.· Operating Temperature: -5 to 55deg.C· Data Logger with computer interface

Digital Online Dew point Analyzer

INR 110500

Dew Point Indicator Model ATS-303D Process Dew Point Analyzer Designed to Handle Rigorous Demands of Moisture and Dew Point Measurement in Compressed air & Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding and Critical Moisture Monitoring Applications.Range:- 80 Deg C to 30 Deg CApplication:-Natural Gas-Hydrocarbon Processing-Catalyst Protection-Heat Treating-Industrial Gases- Dryer & Compressed Air

Online Dew Point Meter

INR 98500

A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity. When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.Specification :Range 0-1000 Mg/M3Sensor Base Systems StyleIntegralRemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 – 32 V DC () at the unit230V AC (Controller)Output: 4-20mA & SPDT RelayProbe Insertion length: 3” to 36” ( 7.6 Cm to 91.4 Cm)Installation Weld the supplied fitting into the pipe or Duct and insert SensorSensor Mounting Flanged½” Male NPTQuick release

Broken Bag Detector

INR 60500

Opacity Monitor:Double Pass Dust Monitor for monitoring dust emissions using DDPFEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurationsBENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulatedensity in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presented as a reading in mg/m³.APPLICATIONS• Cement works• Steel plants• Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading

Dust Opacity Monitor

INR 315500

Dust Monitor :We are instrumental in providing our clients a comprehensive range of Dust Particulate Monitor. The offered monitor is manufactured by our experts in compliance with industry quality standards. This monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. Our provided monitor is manufactured using the advanced technology, innovative machines and the finest grade raw material. Moreover, the entire array is tested on various stringent parameters to ensure its durability and quality.Features:Compact designLong service lifeLow maintenance costOther Details: Advanced detector for dust emissions and process flow applicationsEasily selectable alarm threshold level and time delayTwo independent SPDT relay contacts for alarm indications with selectable fail-safe modeIndustrially hardened, noise resistant design; can operate on an ESP and other challenging applicationsSuitable for all particulates - accurate sensing methodvirtually maintenance-free - low cost of ownershipSuitable for virtually all dust collectorsData Logger with RS232/485 and USB Computer InterfaceWeb based data Transfer through GSM/GPRS technologySpecification:Range 0-1000 Mg/M3Sensor Base Systems StyleIntegralRemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 - 32 V DC () at the unit230V AC (Controller)Output: 4-20mA & SPDT RelayProbe Insertion length: 3

Dust Particulate Monitor

INR 155500

Double Pass Dust Monitor for monitoring dust emissions using DDPFEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurations BENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presente das a reading in mg/m³.APPLICATIONS, Cement works• Steel plants, Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading.

Stack Emissions Monitoring Systems

INR 445500

Double Pass Dust Monitor for monitoring dust emissions using DDP.FEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurationsBENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenanceTHE TECHNOLOGYThe DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaustgas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measuresfluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presentedas a reading in mg/m³.APPLICATIONS• Cement works• Steel plants• Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading.

Dust Monitoring Systems

INR 320000

Backed with leading–edge technology and experienced professionals, we are offering an extensive range of Continuous Emissions Monitoring Systems (SPM). It is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. Following industry distinct guidelines, we manufacture the entire array by utilizing contemporary machines, modernize technology and prime grade raw material. In order to ensure quality, the entire range is thoroughly tested upon a series of parameters. Apart from this, we offer the entire array in a wide range of specifications as per the precise needs of our clients. Features:Easy to useReliable operationPrecisely designedOther Details:A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity.When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.Specification :Range 0-1000 Mg/M3Sensor Base Systems StyleIntegralRemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 – 32 V DC () at the unit230V AC (Controller)Output: 4-20mA SPDT RelayProbe Insertion length: 3” to 36” ( 7.6 Cm to 91.4 Cm)Installation Weld the supplied fitting into the pipe or Duct and insert SensorSensor Mounting Flanged½” Male NPTQuick release

Continuous Emissions Monitoring System

INR 145500

Filter using tags

Online Nitrogen Oxide (NO2) Gas Leak Detector ATS 105MModel ATS 105M single channel digital control modules are designed to supervise and display the satus of a single intergal or remote sensor Model ATS 109TD assembly. Model ATS 109TD is housed in a NEMA 4 x wall mount enclosure or Ex -proof enclosure. Model ATS 105M Single channel controllers interface with industry standred two or three wire 4-20mA sensor or other standred voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarms levels. The Graphics display can read the concentration. LEDs on the front panel provide indication of all three alarms.The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps. to provide direct alarm action, reducing the need for interposing relays . Local Alarm devices can be connected to the configurable on board alarms.The Fail safe supervisory provides a reliable indicaiton that the Monitor is fully operational. The

Online Nitrogen Oxide (N

INR 35500

Online Sulfur Dioxide Gas Leak Monitor - Model ATS 105MThe Monitor is a single Gas Multipurpose monitor that combines simplicity and high performance in a low cost,low maintenance package.The rugged NEMA 4X or 7x assembly is suitable for a variety of industrial , commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or oxygen in process Flue Gas or Ambient Air.Specification:Minium Resolution: 0.1 or 1 unit of the rangeIndication: Digital ContinuousMounting: wallSensor Technology: Appropriate to ApplicationDetection Method: Diffusion / Sample Draw PumpAccuracy: +/- 2%Linearity: +/- 2%Relative Humidity: 0-99 % Non-condensingResponse Time: ( 90% in 10 seconds)singal Output for Recorder: 0- IV,420 mA (Optional)Alarm Setting: High and very High Adjustable over full rangeAlarmCircuits: SPDT 5 AMP 220V ContactsControls: Zero , Span, Alarm setting

Online Sulfur Dioxide (S

INR 35500

Dew Point Meter Model ATS-303D Process Dew Point Analyzer Designed to Handle Rigorous Demands of Moisture and Dew Point Measurement in Compressed air & Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding and Critical Moisture Monitoring ApplicationsRange:- 80 Deg C to +30 Deg CApplication:•Natural Gas•Hydrocarbon Processing•Catalyst Protection•Heat Treating•Industrial Gases• Dryer & Compressed Air

Dew Point Meter

INR 98500

nline Digital Dew Point Merer - Model ATS 303DINSTANT AND DIRECT MEASUREMENT OF DEW POINT, MOISTURE (PPM), VAPOR PRESSURE, HUMIDITY AND TEMPERATUREA MICROPROCESSOR - BASED PRECISION INSTRUMENT TO HELP ENSURING OPTIMUM OPERATION OF DRYING EQUIPMENTApplication:Compressed Air, Industrial Process Control,Drying system,Protection systems, Glove box, Turbines,HVAC & Breathing air.Specification:Probe: Capacitive Thin film water vapor sensorParameters (Selectable) : Dew Point, Moisture, Humidity, Vapor Pressure, TemperatureRange: Dew Point : -60 + 30 deg C (Other ranges are optional)Moisture: 0-23000 PPMHumidity: 0-100%Vapor Pressure : 0-17.5mmHgTemp: 0-80 deg CAccuracy: +/-1 deg C to 30 deg C dew point, +/-2 deg C from -60 deg C to 0 deg CAnalog Output: 4-20mAResponse Time: 10 sec for 63% step changeHousing : High Impact Plastic

Digital Online Dew Point

INR 105000

Digital Online Dew point Analyzer - Model ATS 303D.Ideal for precise monitoring of moisture or dew point in air or gas output from dryers system or in process. Continous monitoring of dew point results in reduced maintance costs and downtime caused by separated moisture, The main cause of corrosion in pneumatic systems. the analyzer usesa highly accurate capacitive integrated thin film water vapor sensor,and is an economic alternative to the chilled-mirror dew point type meters. It utilizes microprocessor based circuits to give a direct read out in dew point or other units and other units corresponding to sensor output based on psychometric equations. To achieve higher accuracies it uses temperature compensation over complete operational range.The insturment is contained in a high impact plastic housing.Application: Compressed air, Industrial process control,Drying system, Protection systems,Glove box, Turbines, HVAC & Breathing airSpecification:Application: Compressed Air/ Gas· Range: -60 to +30 Deg C· Moisture : 0-23000 PPM· Accuracy : 0-30 deg c +/-1%.-60 to 0 Deg C +/- 1.5%· Display : High quality Graphics LCD (128x 64)· Sampling : Direct Plug In· Power Supply : Rechargeable Ni-cad Battery Pack with Charger.· Response Time: 30 seconds at 95% variation.· Operating Temperature: -5 to 55deg.C· Data Logger with computer interface

Digital Online Dew point

INR 110500

Dew Point Indicator Model ATS-303D Process Dew Point Analyzer Designed to Handle Rigorous Demands of Moisture and Dew Point Measurement in Compressed air & Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding and Critical Moisture Monitoring Applications.Range:- 80 Deg C to 30 Deg CApplication:-Natural Gas-Hydrocarbon Processing-Catalyst Protection-Heat Treating-Industrial Gases- Dryer & Compressed Air

Online Dew Point Meter

INR 98500

A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity. When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.Specification :Range 0-1000 Mg/M3Sensor Base Systems StyleIntegralRemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 – 32 V DC () at the unit230V AC (Controller)Output: 4-20mA & SPDT RelayProbe Insertion length: 3” to 36” ( 7.6 Cm to 91.4 Cm)Installation Weld the supplied fitting into the pipe or Duct and insert SensorSensor Mounting Flanged½” Male NPTQuick release

Broken Bag Detector

INR 60500

Opacity Monitor:Double Pass Dust Monitor for monitoring dust emissions using DDPFEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurationsBENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulatedensity in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presented as a reading in mg/m³.APPLICATIONS• Cement works• Steel plants• Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading

Dust Opacity Monitor

INR 315500

Dust Monitor :We are instrumental in providing our clients a comprehensive range of Dust Particulate Monitor. The offered monitor is manufactured by our experts in compliance with industry quality standards. This monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. Our provided monitor is manufactured using the advanced technology, innovative machines and the finest grade raw material. Moreover, the entire array is tested on various stringent parameters to ensure its durability and quality.Features:Compact designLong service lifeLow maintenance costOther Details: Advanced detector for dust emissions and process flow applicationsEasily selectable alarm threshold level and time delayTwo independent SPDT relay contacts for alarm indications with selectable fail-safe modeIndustrially hardened, noise resistant design; can operate on an ESP and other challenging applicationsSuitable for all particulates - accurate sensing methodvirtually maintenance-free - low cost of ownershipSuitable for virtually all dust collectorsData Logger with RS232/485 and USB Computer InterfaceWeb based data Transfer through GSM/GPRS technologySpecification:Range 0-1000 Mg/M3Sensor Base Systems StyleIntegralRemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 - 32 V DC () at the unit230V AC (Controller)Output: 4-20mA & SPDT RelayProbe Insertion length: 3

Dust Particulate Monitor

INR 155500

Double Pass Dust Monitor for monitoring dust emissions using DDPFEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurations BENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presente das a reading in mg/m³.APPLICATIONS, Cement works• Steel plants, Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading.

Stack Emissions Monitori

INR 445500

Double Pass Dust Monitor for monitoring dust emissions using DDP.FEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurationsBENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenanceTHE TECHNOLOGYThe DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaustgas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measuresfluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presentedas a reading in mg/m³.APPLICATIONS• Cement works• Steel plants• Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading.

Dust Monitoring Systems

INR 320000

Backed with leading–edge technology and experienced professionals, we are offering an extensive range of Continuous Emissions Monitoring Systems (SPM). It is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. Following industry distinct guidelines, we manufacture the entire array by utilizing contemporary machines, modernize technology and prime grade raw material. In order to ensure quality, the entire range is thoroughly tested upon a series of parameters. Apart from this, we offer the entire array in a wide range of specifications as per the precise needs of our clients. Features:Easy to useReliable operationPrecisely designedOther Details:A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity.When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.Specification :Range 0-1000 Mg/M3Sensor Base Systems StyleIntegralRemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 – 32 V DC () at the unit230V AC (Controller)Output: 4-20mA SPDT RelayProbe Insertion length: 3” to 36” ( 7.6 Cm to 91.4 Cm)Installation Weld the supplied fitting into the pipe or Duct and insert SensorSensor Mounting Flanged½” Male NPTQuick release

Continuous Emissions Mon

INR 145500

Page 3 out of 7.33

Stack Analyzer |SPM Monitoring Systems |Stack Monitoring System, |SPM Monitor |Dust Monitoring Systems |Stack Monitoring Systems |Stack Monitoring System |Dust Particulate Monitor |Continuous Stack Monitoring System |Dust Monitor |Stack Monitor |Stack Emission Monitoring Systems |Continuous Emission Monitoring System |Portable Stack Gas Analyzers, Stack Monitor |Stack Emission Analyzer |Dew Point & Moisture Analyzer |Digital Online Dew Point Meter |Online Dew Point Analyzer |Online Dew Point Meter |Moisture Aanalyzer |PM Monitor |Indoor Air Quality Monitor |Handhel Dust Monitor |Portable Dust Monitor |Opacity Monitor |Dust Opacity Monitor |Fixed Dew Point Monitor |Dew Point Meter |Fixed Dew Point Analyzer |Fixed Type Hydrogen sulfide Gas Leak Detector |Online Hydrogen Sulfide Leak Detector |Online H2S Leak Detector |Broken Bag Detector |Gas Leak Detection Monitoring System |Ammonia Gas Leak Detector |Fixed Gas Leak Monitor |Sulfur Dioxide Gas Leak Monitor |Dew Point Monitor |Dew Point Analyzer |Moisture analyzer |stack monitoring system |gas analyzer |continuous emission monitoring systems |Dust Monitoring System |Stack Gas Analyzer |Dust Analyzer |Dust Particulate Monitoring System |Gas Analyzer |Fixed Gas Monitor |Gas Leak Detector |SO2 Analyzer |SOx Monitor |Gas Leak Detection System |NOx Leak Detector |Gas Leak Monitoring System |Fixed Type Nitrogen dioxide Gas Leak Detector |SOx Leak Detector |Biogas Monitor |Portable BioGas Analyzer |Biogas Analyzer |Online GasAnalyzer,Portable Gas Analyzers |Portable Gas Analyzers |Gas Detector |Continous Gas Monitoring System |Online Nox Analyzer |Online Gas Analyzer |Continuous Emission monitoring System |Online Gas Monitoring System |Portable Gas Detector |Single Gas Detector |Gas Monitor |Headspace Gas Monitor |Portable Gas Monitor |Mosture Analyzer |De Point & Moisture Meter |Hydrogen sulfide Gas Leak Detector |Online Hydrogen sulfide Gas Leak Detector |Emission Monitor |Continuous Gas Analyzer |Continuous Dust Monitoring System |Continuous Gas Monitor |Gas Monitoring System |Continuous Emissions Analyzer |Online Gas Monitoring Systems |Ammonia Gas Montiring System |Continuous Gas Monitors |Multi Point Leak Detector |Gas Leak Monitor |Chlorine Gas Monitoring System |Fixed Chlorine Gas Monitoring |Chlorine Gas Analyzer |Chloring Gas Monitor |Dew Ponit Transmiter |Moisture Transmitter |Chlorine Leak Detector |Fixed Gas Leaak dETECTIOR |Portable Biogas Analyzer |Biogas Monitoring System |Methane Gas Analyzer |Stack Gas Analyzers |continuous Emission Monitoring Systeme |Stack Emission Monitoring System |Opacity Monitors |Stack Emissions Monitoring Systems |Sa |NO2 Leak Detector |NOx Gas Analyzer |Fixed Type Gas Monitoring System |Multi Gas Detector |Multi Gas Leak Detector |ontinuous Emissions Monitoring Systems

Have any question or need any business consultation?

Have any question or need any business consultation?